With baited breath I closely watched my hibiscus plants for any signs of life. They spent the winter outdoors under a tent. I was fairly certain that the variegated tropical hibiscus I grew from starter plants bought on Etsy in 2021, Snow Queen and Rose Queen, met an untimely demise due to the cold.
Excited to see the Summer Carnival making a comeback.
Back in October I purchased a Quictent pop-up grow house in preparation of housing my frost-tender plants outdoors, including my first-this-year variegated lemon tree. It took 2 tries to get it right, but in the end I was happy with the results. All I have to say is watch the unpacking video, read the instructions, and watch the video AGAIN so that you don’t encounter problems in setup. I confess that I strayed from the step-by-step order and ended up snapping one of the fiberglass poles, held together by stretchy rope.
I walled off about 32 square feet on the patio with a cinderblock border about 3 blocks high, or roughly 2 feet tall.
I then unpacked and erected the tent, though I found it helpful on the 2nd try, to have an extra pair of hands setting it up. Strong winds can make setup challenging.
Originally, DH suggested a pass through, so we cut 4 pieces of lumber, stained them, and purchased additional planter blocks to create something of sliding system for a removable wall.
I picked up a wifi enabled mini hygrometer made by Inkbird to monitor night time internal temperatures. I soon learned that on frigid nights, the grow house really didn’t offer much insulation. I would have to find a way to heat the space.
String lights to the rescue. Or not! I dug through closets hunting down old Christmas string lights. Meanwhile, DH put together a light stand constructed from PVC pipes and erected it inside the grow house.
Unfortunately, the mini string lights didn’t produce enough heat to impact overnight temperatures inside the grow house. But it looked pretty enough!
Blue and white mini string lights, just not enough heat
Temperatures stayed anywhere in the range of 4 to 10 degrees above local outdoor overnight temps. And the tent was brighter too. Overall I used a total of 3 25ft string lights, connected to a splitter on the power cord end. The number of bulbs limited the number of strings that could be connected together, without blowing a fuse–unlike the LED strings that I had hung previously.
On the wall end, the power cord connects to a wifi-enabled dual headed outlet rated for outdoor use. It was handy to schedule times when the lights turned off and on. I could also run automation to turn on the lights when local temperatures dipped below a certain threshold.
All in all, it was a learning experience setting up the tent and heating it. Time will tell if this outdoor grow house setup can endure the harsh winter elements. The only grievance I have is with the delicate C9 bulbs whose filaments break very easily at the slightest blow. I discovered this after I tested every light beforehand, only to find bulbs damaged post installation.
Now that winter temperatures have finally arrived in North Texas, the plants that I intend to shelter indoors have settled into their new home in the garage and on my window sill.
I’m debating if new-tech LED panels versus T5 fluorescents are the way to go for starting and sustaining plants indoors. In the cold conditions of a garage in winter, a fluorescent light fixture might emit enough warmth to keep temperatures tolerable for mature plants, but cook young seedlings. On the other hand, LEDs remain cool enough to be useful in seed starting and can emit full spectrum light, but tend to be higher in starting costs. Longevity and efficiency are also considerations, since fluorescent will use up more electricity and need bulb replacement more frequently.
I have a 77″ tall rolling wire rack ordered which I plan to outfit with lights and store the remainder of my potted plants in order to reclaim some floor space. But finding a grow light to suit the space, budget and light requirements is daunting. I’ve spent days scrolling through the internet reading articles and watching videos on the subject of grow lights; a search that often boils down to which camp you belong to: commercial horticultural operations or cannabis grower. Anything that caters to an indoor plant hobbyist or small scale/home gardener almost always tends to be of low or budget quality.
Can I get by with $15 Walmart lights? I have successfully germinated seeds with the existing light setup I have, but I’m wondering if I can start them faster, stronger, better? Stay tuned!
I fear I’ve lost my best, most floriferous lavender this year. Despite that I’ve potted up all of my specimens, my fernleaf lavender which I started from a 4″ starter plant thrived in potted conditions and more than quadrupled in size.
Unfortunately, I’ve been rotating the lavenders in and out of the house as temperatures permit. But lately, they’ve been residing in low light conditions in my kitchen.
I didn’t keep a close eye on the fernleaf lavender. I soon discovered that it was swathed in cobwebs, and the tips began to show browning/greying. After some research, I determined that the plant was likely infested with spider mites. While it was suggested to spray the plant off, the cold temperatures turned me off the idea.
I took the drastic step of hard pruning the plant down to the surface, then placed it–along with the rest of the potted lavenders–in the garage under grow lights.
Off with your head!
I watered the plant with a light nitrogen solution (i.e. Clonex) and am crossing my fingers that the lavender will spring back from this shock.
